Change Owner Id; Password Programming - Aastra DT690 User Manual

DT690
1. Enter Settings from the main menu.
2. Select Locks.
3. Select Phone lock.
4. Select Auto phone lock.
5. Select On, or On in charger.
6. Enter PIN code, press OK.
7. Press Back to save the settings.
If forgotten, the PIN code can be removed by your distributor.
Note: Before using this feature, look up the IPEI code of your phone and write
20.7

Change Owner ID

The owner ID is set to identify the telephone.
1. Enter
2. Select Owner ID.
3. Enter the identity.
4. Press Save to save the setting.
20.8

Password Programming

You will be prompted to enter your user password when accessing certain
services, most particularly
•
•
•
By default, your user password is 1234. It is strongly recommended that you
change it to any other 4 digit code including the * or # key - to ensure that
use of the mentioned services is as secure as possible, and to preserve the
confidentiality of your mailbox, when applicable.
114
When the phone is locked,
it down, see Section 2.4 on page 10. If you forget the PIN code, contact
your certified Aastra Sales Partner for assistance, to reset to default.
.
When placing a call in substitution or with signature from your extension or
a third party set.
When activating/deactivating a call forward from your extension or a third
party set (follow me service).
When consulting or personalizing your mailbox within your facility's
integrated voice mail system, when applicable.
is shown in the display.
1424-EN/LZT 103 090 Uen A1 2008-10-24