Aastra DT690 User Manual page 77

Note: Some characters require 2 bytes in the final message, therefore the
The first character entered will be an upper level character followed by lower
level characters unless the *, key is pressed before entering the character.
When pressing a key, the first available character on that specific key is
displayed, see Section 16.6.1 on page 90.
To get any of the other characters on that key, press the key until that character
appears in the display.
To get the character E, press key 3 twice.
"E" appears in the display and is selected
after a timeout or when another key is pressed.
To delete a character, press "Clear".
Press "Send", enter the call number and
press "Send" to send the message.
Example 1
14.2.8 Opening a Sent Message
To open a sent message:
1. Enter the Messaging menu.
2. Select Inbox or Sent and select the message.
3. Press View to send the message.
14.2.9 Sending to Another Destination
1. Enter the Messaging menu.
2. Select Inbox or Sent and select the message.
3. Press More and select Forward.
4. Press Send.
5. Enter the number and press Send.
1424-EN/LZT 103 090 Uen A1 2008-10-24
user will sometimes not be able to enter 160 characters.
Messaging
69