Aastra DT690 User Manual page 108

DT690
6. Press
Activating Follow-Me from a DT690 phone the calls are not forwarded to
1.
2. Dial your number and press *.
3. Dial the new number to where incoming calls should be diverted.
4. Press
5. Enter a password.
6. Press
7. Wait for the Service Acceptance Tone.
8. Press
100
to finish the procedure.
Dial 6 5 *
# To Dial only in case of an external position. Needed only for an external
position to mark the end of the Directory number.
Note: An external number is composed of the external access 0 followed
by the actual external Directory number.
.
to activate the service.
The third party set confirms your service programming and/or plays the
service acceptance tone.
to finish the procedure.
1424-EN/LZT 103 090 Uen A1 2008-10-24