First Scan Roll Drive Gear (40T) Removal - Lexmark MX81 series Service Manual

2
Remove the e-clip securing the deskew idler shaft from the inside of the ADF.
3
Remove the ADF front cover. See
4
Remove the e-clip securing the deskew idler shaft from the front of the ADF.
5
Remove the deskew idler shaft.

First scan roll drive gear (40t) removal

1
Remove the ADF rear cover. See
2
Remove the ADF rear side drive parts pack. See
3
Remove the e-clip (A) on the first scan roll drive gear.
"ADF front cover removal" on page
"ADF rear cover removal" on page
"ADF rear side drive parts pack removal" on page
Repair information
467
443.
454.
7463
456.