500-Sheet Drawer (2Tm)-Media Feed Unit Drive Gear - 28 / 21 Tooth Removal - Lexmark X850e Service Manual

7500-XXX
2X 500-sheet drawer (2TM)—media feed unit drive gear - 28 / 21 tooth removal
1.
Remove the media feed unit assembly. See
removal (tray 3)" on page 4-9
(tray 4)" on page
2.
Remove the harness from the bracket (A).
3.
Remove the three screws securing the bracket (A) to the media feed unit assembly.
4.
Remove the bracket (A).
Note: The gears may become detached from the bracket (A).
5.
Remove the feed unit drive gear - 28 tooth / 21 tooth (B).
Clamp
Note: Before re-installing, ensure all gears and washers are securely attached to the bracket (A).
4-26
Options Service Manual
"2X 500-sheet drawer (2TM)–media feed unit assembly removal
or
4-11.
Harness
A
Rear
"2X 500-sheet drawer (2TM)–media feed unit assembly
Washer
B
Rear