Removing The "S" Oven Module - Thermador SMW272 B Service Manual

Lower Oven Section
REMOVING THE LOWER OVEN MODULE
WARNING
Turn off the electrical power circuit to the
oven at the main junction box before ser-
vicing this unit.
CAUTION
When you work on the oven, be careful
when handling the sheet metal parts.
There are sharp edges present and you
can cut yourself if you are not careful.
Reflector
Broil Element
Left Rack Support
(27") Convection Kit—#35-00-661
Catalyst
Halogen Lamp
Right Rack Support
Bake Element
Convection Rack
1. Turn off the electrical power to the oven.
2. To make servicing easier, remove the oven
door (see Page 57).
3. Remove the oven from the wall.
4. Remove the components from the oven,
shown in Figure 26. Refer to the sections in
this manual for the procedures on removing
the components.
5. With all of the oven components removed,
remove the six screws (three on each side)
from the front sides of the oven can.
6. Pull the oven can forward and remove it.
Thermal
Sensor
Convection Motor
Assembly
Convection Baffle
"S" Oven Module Kit
Page 60
SMW Oven Service Manual
Convection Mtg.
Bracket Cover
Convection
Element
Oven Can Screws
(3 on each side)
Counter Support
Bracket (L & R)
Counter Support
Hinge
Figure 26