Factory Five Racing Mk4 Roadster Assembly Manual page 544

When installing the caliper make sure that the brake fluid bleed screw is on the top side of the caliper.
Do not worry about the LH/RH markings on the calipers. Torque the two 12mm mounting bolts to
55ft/lbs using a 16mm socket.
Allow the silicone on the cover to dry overnight then fill the rear end with 4oz of friction modifier then
1.875qts of 75W-90 gear oil (or until oil reaches the fill plug).
Replace the fill plug and tighten to 15-30 ft/lbs.
543
www.factoryfive.com 508-291-3443