Factory Five Racing Mk4 Roadster Assembly Manual page 82

Complete kit

Hide thumbs Also See for Mk4 Roadster:

Table of Contents

The Panhard bar mounts to the car using the ⅝"x 3" bolts and spacers. Install the Panhard bar to the

passenger side traction lock bracket. Three spacers are used in the front (2) 0.375" (FFR# 14064) and (1)

0.25" (FFR# 14065). The rear uses the thin 0.0625" shim (FFR# 13337). It will be necessary to adjust

the length some to fit, make sure that you adjust the same amount on both sides. There should never be

less than ¾" of threads screwed into either the Panhard bar or the upper arm.

www.factoryfive.com

508-291-3443