Oil Filter Relocator - Factory Five Racing Mk4 Roadster Assembly Manual

If using a 4.6L or Coyote engine remove the stock oil pan and install a shallow oil pan.
Unpack the engine and transmission mounts and attach to the engine but leave the bolts loose enough to
be able to wiggle the mounts around for alignment.

87-95 Oil Filter Relocator

⅞" wrench, razor knife, Teflon tape, chassis grease, ⅜" hex key
Oil filter relocating kit, oil, oil filter
Place the O-ring in the adapter groove.
If the O-ring will not seat properly, put it in the freezer for 15 minutes and use a small amount of
chassis grease to hold it in place while spinning on the adapter. Tighten ½ turn after solid
resistance is felt. The outlets for the hoses should be facing towards the front of the engine.
214
www.factoryfive.com 508-291-3443