Factory Five Racing Mk4 Roadster Assembly Manual page 261

Using a / " hex key and ½" wrench, tighten the shoulder bolt lock nut so that the ratchet to handle
3
16
mount plates are against the bushings but they can still move up and down. Make sure the ratchet to
handle mount plate next to the locknut does not get caught on the edge of the shoulder bolt.
Slide the lower handle between the ratchet to handle mount plates and bolt the three pieces together
using the two / "x 1" button head screws.
5
16
260
www.factoryfive.com 508-291-3443