Fujitsu PRIMEQUEST 2000 Series Installation Manual page 186

Appendix G Starting Web BIOS
F.3 Method of identifying SB where SAS RAID Controller is mounted
6. Check the number of UEFI driver and the number of LSI EFI SAS Driver.
In below example, the number of UEFI driver is '126'.
7. Execute dh command and check the controller number of 'LSI MegaRaid SAS Control'
Shell> dh –d 126
In below example, the controller number is '125'.
FIGURE G.5 drivers command of UEFI Shell
FIGURE G.6 dh command of UEFI Shell
162
CA92344-0536-04