Method Of Identifying Sb Where Sas Raid Controller Is Mounted; Figure F.7 [Boot Manager] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Appendix F Starting HII Configuration Utility
F.3 Method of identifying SB where SAS RAID Controller is mounted
F.3 Method of identifying SB where SAS RAID Controller is
mounted
This section describes how to identify SB where SAS RAID Controller displayed in [Device Manager]
window is mounted.
The SB where SAS RAID Controller is mounted can be identified by procedure below.
-
Turn on Alarm LED of HDD/SSD connected to the SAS RAID Controller.
-
Search the SB with HDD/SSD blinked Alarm LED in chassis.
-
It is the SB that the SAS RAID Controller is mounted.
1.
Select [Device Manager] and press [Enter] key in [Boot Manager] window.
FIGURE F.7 [Boot Manager] window
153
CA92344-0536-04
Advertisement
Table of Contents
