Preparation Of Installation; Vmware Installation; Table 4.6 Operating System Installation By Svim - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 4 Installation of Operating System and bundled software
4.8 Procedure to install VMware into internal HDD/SSD

4.8.2 Preparation of installation

See the VMware information thoroughly at the time of installation preparation.
For the VMware product, please contact who you purchased the product from.
Set the following.
1. The following disk images are prepared.
VMware media
2. Remove all FC cables.
3. Mount the following disk image by connecting the video redirection.
4. Change the boot order, and set DVD Boot to the top priority of the starting order.
For details, see "1.3.1 [Power Control] window" of PRIMEQUEST 2000 series Tool Reference (CA92344-0539).

4.8.3 VMware installation

This section describes the installation of the operating system by SVIM.
The type of the operating system installation by SVIM includes the following types. For the detailed procedure of the
concerned mode, see ServerView Suite ServerView Installation Manager.
Mode
Quick mode
Guide mode
Operations
1. The settings are done to boot the ServerView Suite DVD from virtual media for the partition.
For details on configuration, see"1.6.2 Remote control operation (BMC)" of PRIMEQUEST 2000 series
Administration Manual (CA92344-0537).
2. The power supply of the partition is turned ON.
Note:
It can be started by selecting "Force boot from DVD" by Boot Selector in MMB Web-UI or it can be started from the
virtual media by changing the boot order to DVD by UEFI. If it is started by selecting "Force boot from DVD" by Boot
Selector in MMB Web-UI it is started in Legacy mode.
When operating system corresponds to the UEFI mode, the installation can be done in UEFI mode by changing the
boot order according to the following procedure.
a. After turning on the power supply of the partition, while the FUJITSU logo is displayed, press any key (such as
[Space] key) except [Enter] key and the Boot Manager front page is displayed.
b. The menu is selected on the Boot Manager front page in the following order. [Boot Maintenance Manager]-
[Boot Options]-[Change Boot Order]-[Change the order]
c. For UEFI aware OS, UEFI: Fujitsu Virtual CDROMx xxx is set at the upper-most step.
For Legacy OS, Fujitsu Virtual CDROMx xxx is set at the upper-most step.
For details on the setting method of boot order, see "■ Change Boot Order of "3.5.2 [Boot Options] menu" of
PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
d. [Commit Changes and Exit] - [Reset System] is specified and the partition is rebooted.
3. After a period of time, the language selection window is displayed.
In case of English, select "English".
4. In initial display window, click [Next] button without setting anything.
5. Select [Deployment] in [Welcome ServerView Installation Manager] window.
Operating system installation by SVIM
TABLE 4.6
Functional Overview
You can simply use the minimum settings
necessary for operating system installation.
This mode uses Fujitsu's recommended
settings.
You can specify setup information by following
the instructions of the wizard. You can save the
specified information in a configuration file for
use during reinstallation.
Purpose
For easy installation.
For detailed setting of RAID or OS.
80
CA92344-0536-04