Figure 3.6 Example Of [Ipv6 Interface] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
2. The values are entered in [IP Address], [Subnet Mask] (
*
1: [Prefix Length] is entered at the time of [IPv6]. [Gateway address] is also entered at the time of [Gateway address].
3. Each item is entered by clicking [Enable] for [Interface] in [MMB#0 IP Address] or [MMB#1 IP Address]. Here, the
assigned Physical IP Address is specified.
4. [Apply] button is clicked when the required items are set up.
Notes
If an incorrect value of IP Address is set, MMB Web-UI is not displayed. In that case, the correct value is set by
connecting MMB console PC to the MMB COM port.
Remark
The Physical IP Address and the Virtual IP Address of MMB#0, and MMB#1 are set up in the same subnet.
Example of [IPv6 Interface] Window
FIGURE 3.6
20
*
1) of [Virtual IP Address]. Host name is also set up.
CA92344-0536-04