Setting Of Extended Socket; Figure 3.38 Example Of [Mode] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.5 Partition Configuration (Extended Partitioning)

3.5.8 Setting of Extended Socket

This section describes the setting of Extended Socket.
Enabling of Extended Socket function and setting of Zoning are needed.
Remark
- Do not start two or more MMB Web-UI screens when you change the setting of Extended Socket function and change
on a single MMB Web-UI screen.
- The added procedure is necessary for changing the Zoning setting of Extended Partition which power has already
been turned on. For more detail, see "3.2.2 Extended Socket" of PRIMEQUEST 2000 series Administration manual
(CA92344-0537).
Enabling of Extended Socket
1. Click [Partition]-[Partition#x]-[Mode].
[Mode] window is displayed. For details on [Mode] window, see " [Mode] window" of "1.3.9 [Partition#x] menu" of
PRIMEQUEST 2000 series Tool Reference (CA92344-0539).
2. Select [Enable] of setting of Extended Socket.
3. Click [Apply] button.
Example of [Mode] Window
FIGURE 3.38
56
CA92344-0536-04