Power Supply Unit; Removing A Power Supply Unit - QUANTA STRATOS S210 Series S210-X12MS Technical Manual

I H
NSTALLING ARDWARE

2.7 Power Supply Unit

The S210-X12MS server models support a single power supply as shown in the following illustrations.
CAUTION!
!
D
ISCONNECT THE POWER SUPPLY UNIT FROM THE POWER
SOURCE BEFORE REMOVING PSU
COULD RESULT IN DAMAGE TO THE EQUIPMENT OR PER
.
SONAL INJURY

Removing a Power Supply Unit

1. Disconnect the power cables from the mainboard connec-
tors.
.
FAILURE TO DO SO
-
2-18
2. Remove six (6) screws securing the PSU to the chassis.
Figure 2-21. Removing the PSU Screws
3. Remove the PSU from the chassis.
P S U
OWER UPPLY NIT