Installing Hardware; Safety Measures - QUANTA QSSC-980 User Manual

錯誤 尚未定義樣式。
!

— Installing Hardware

Chapter 2
I n s t a l l i n g H a r d w a r e
I n s t a l l i n g H a r d w a r e

Safety Measures

Computer components and electronic circuit boards can be damaged by discharges of static electricity. Working
on computers that are still connected to a power supply can be extremely dangerous. Follow the simple guidelines
below to avoid damage to your computer or injury to yourself.
Always disconnect the computer from the power outlet whenever you are working inside the computer case.
If possible, wear a grounded wrist strap when you are working inside the computer case. Alternatively, discharge
any static electricity by touching the bare metal chassis of the computer case, or the bare metal body of any other
grounded appliance.
Hold electronic circuit boards by the edges only. Do not touch the components on the board unless it is necessary
to do so. Do not flex or stress the circuit board.
Leave all components inside the static-proof packaging until you are ready to use the component for the installa-
tion.
8