Front Panel User Interface; Power Button; Id Button; Leds - QUANTA QuantaGrid Series User Manual

BMC

Front Panel User Interface

The BMC provides control panel interface functionality including indicators (Fault/status
and Identify LEDs) and buttons (Power/ID).

Power Button

The Power buttons allow to control the system status.

ID Button

The control panel Chassis Identify button toggles the state of the Chassis ID LED. If the ID
LED is off, then a button press will turn the LED on (blinking). If the LED is on, a button
press or IPMI Chassis Identify command will turn the LED off.

LEDs

The following table contains information on Status, ID and Heartbeat LED's.
Table 3.1: Status LED, ID LED, and Heartbeat LED
LED
S
Status LED
ID LED
Heartbeat LED

LAN Interface

BMC LAN interface in AST2400 is assigned to its Shared NIC LAN and a dedicated NIC
(Default) in the system. IPMI Specification v2.0 defines how IPMI messages, encapsulated
in RMCP/RMCP+ packet format, can be sent to and from the BMC. This capability allows a
remote console application to access the BMC and perform the following operations:
Chassis control: obtain chassis status, reset and power-up the chassis

Obtain system sensor status

Obtain and Set system boot options

Obtain Field Replaceable Unit (FRU) information

C
OLOR
Amber (Status LED)
Blue
Blue
Green
S
TATUS
Blinking System Event
Off Normal status
On Power on
Off Power off
Off Normal status
Blinking Identify the system with interval
Solid ON Identify the system
On/Off BMC is not Ready
Blinking BMC is Ready
F P U I
RONT ANEL SER NTERFACE
D
ESCRIPTION
3-2