Led Opl Control - ALLIANCE CA050L Installation Operation & Maintenance

LED OPL Control

EO and RE Control Suffixes
1. Press the Up or Down keypad to change cycles.
To customize a cycle, refer to the Programming Manual.
2. Press START (
) to start selected cycle.
IMPORTANT: If the loading door or lint panel door is
opened during the cycle, the heating system will
shut off and the motor will stop. To restart the cycle,
both doors must be closed and the START (
pad must be pressed.
3. When the cycle is complete, open door and remove laundry.
To prevent the risk of fire, remove laundry imme-
diately in case of power failure.
NOTE: This machine includes an anti-wrinkle/
extended tumble feature. After the drying cycle is
complete, the cylinder will tumble without heat ev-
ery few minutes. The intermittent tumbling will con-
tinue for one hour or until the door is opened. After
an hour the machine enters delayed tumble and will
tumble for two minutes every hour for up to 18
hours or until the door is opened.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
WARNING
TMB1438R_SVG
Figure 49
)
W779
77
Operating Instructions
S Models
TMB1345R_SVG
H Models
TMB1346R_SVG
Figure 50
Part No. 70457901ENR12