Grounding Instructions; For Ce Models Only - ALLIANCE CA050L Installation Operation & Maintenance

Electrical Requirements

Grounding Instructions

NOTE: To ensure protection against shock, this tumble
dryer MUST be electrically grounded in accordance
with the local codes, or in the absence of local codes,
with the latest edition of the National Electrical Code
ANSI/NFPA No. 70. In Canada the electrical connec-
tions are to be made in accordance with CSA C22.1 lat-
est edition Canadian Electrical Code, or local codes.
Electrical work should be done by a qualified electri-
cian.
This tumble dryer must be grounded. In the event of malfunction
or breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current. This tum-
ble dryer must be connected to a grounded metal, permanent wir-
ing system; or an equipment grounding conductor must be run
with the circuit conductors and connected to the appropriate
ground location.
• Metal conduit and/or BX cable is not considered ground.
• Connecting the Neutral from the electrical service box to the
tumble dryer ground screw does not constitute a ground.
• A dedicated ground conduit (wire) must be connected be-
tween the electrical service box ground bar and tumble dryer
ground screw.
To reduce the risk of electrical shock, de-energize
the electrical circuit being connected to the tumble
dryer before making any electrical connections. All
electrical connections should be made by a qualified
electrician. Never attempt to connect a live circuit.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
WARNING
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and dan-
gerous operation. Verify proper operation after serv-
icing.

For CE Models Only

All OPL (non-vend) models are factory-equipped with an emer-
gency stop button on the front panel. If the emergency stop func-
tion is desired on coin-operated models, an external emergency
stop button may be installed.
NOTE: Activation of the emergency stop switch stops
all machine control circuit functions, but DOES NOT re-
move all electrical power from machine.
W409R1
54
CAUTION
Part No. 70457901ENR12
W071