Electrical Specifications - ALLIANCE CA050L Installation Operation & Maintenance

Electrical Specifications

NOTE: Wire sizes were obtained from the Canadian
Electrical Code for 75 C. wire and are intended for use
as a guideline only. Electrical connections should be
made by a qualified electrical contractor in accordance
with all applicable local and national requirements.
NOTE: Electrical specifications below are subject to
change without notice. Always refer to product serial
plate for most current specifications of product being
installed.
050 Series Gas and Steam Models
Serial Plate Rating
120V/60Hz/1ph
120/208-240V/60Hz/1ph
208-240V/60Hz/1ph
200-208-240V/60Hz/1ph
230-240V/50Hz/1ph
200-208/240V/60Hz/3ph
200V/50Hz/3ph
230-240V/50Hz/3ph
380V/50 or 60Hz/3ph
400-415V/50Hz/3ph
440V/60Hz/3ph
460-480V/60Hz/3ph
N/A = Not Applicable
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Terminal Block
Connections Re-
quired
L1, Neutral and ground
L1, L2, Neutral and ground N/A
L1, L2, Neutral and
ground
L1, L2 and ground
L1, Neutral and ground
L1, L2, L3 and ground
L1, L2, L3 and ground
L1, L2, L3 and ground
L1, L2, L3 and ground
L1, L2, L3 and ground
L1, L2, L3 and ground
L1, L2, L3 and ground
Table 8
NOTE: Use copper conductors only.
NOTE: Connect to individual branch circuit.
NOTE: 3 Phase Only – Each tumble dryer must be con-
nected to its own individual branch circuit breaker, not
fuses, to avoid the possibility of "single phasing" and
causing premature failure of the motor(s).
Serial Plate Amps
Nonre- Revers-
versing ing
9.3 N/A
12
5.1 N/A
5.1 N/A
6.3 6.9
2.8 4.0
3.3 4.2
3.1 4.3
1.6 2.0
1.6 2.0
1.4 1.9
1.4 1.9
59
Electrical Requirements
Recommended Circuit
Wire Size
Breaker AWG
Rating [mm
15A – 1 pole 14 [2.5 ]
15A – 1 pole 14 [2.5]
15A – 1 pole 14 [2.5 ]
10A – 2 pole 14 [2.5 ]
15A – 1 pole 14 [2.5 ]
10A – 3 pole 14 [2.5 ]
10A – 3 pole 14 [2.5 ]
10A – 3 pole 14 [2.5 ]
10A – 3 pole 14 [2.5 ]
10A – 3 pole 14 [2.5 ]
10A – 3 pole 14 [2.5 ]
10A – 3 pole 14 [2.5 ]
Part No. 70457901ENR12
2
]