Maintenance; Daily; Monthly; Quarterly - ALLIANCE CA050L Installation Operation & Maintenance

Daily

1. Inspect the area surrounding tumble dryers, remove all com-
bustible materials, including lint, before operating the ma-
chines.
2. Check cylinder for foreign objects to avoid damage to cloth-
ing and equipment.
3. Clean lint from lint compartment and screen to maintain prop-
er airflow and avoid overheating.
To reduce the risk of serious injury, do not open
the lint panel while the tumble dryer is in opera-
tion. Before cleaning the lint screen, open tumble
dryer door and allow cylinder to completely stop.
a. Open the lint panel.
b. Remove all accumulated lint in the lint compartment area.
Lightly brush any lint that may be left on the lint screen.
c. Be sure the lint screen is not torn.
d. The lint screen is designed to completely cover the entire
opening in the lint screen panel. Be sure that it does so.
e. Wipe lint off of the cabinet high limit thermostat and ther-
mistor. Refer to Figure 69 .
f. Replace the lint compartment panel on the tumble dryer
ensuring a tight fit, and lock if applicable.
4. At end of day, clean the machine's top, front and side panels
with mild detergent. Rinse with clean water. DO NOT use
products that contain alcohol on the control panel.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT

Maintenance

WARNING
W410R1
1
1. Thermistor
2. Thermostat
3. Blower
4. Lint Screen

Monthly

1. Remove lint and debris from inside exhaust duct to maintain
proper airflow and avoid overheating.
a. Remove external duct and duct access covers, if present.
b. Clean inside of duct with a vacuum.
c. Clean dampers and make sure they operate freely.
d. Replace duct and all access covers before returning tumble
dryer to operation.
2. Ensure even lint distribution over lint screen.
3. Carefully wipe any accumulated lint off the cabinet high limit
thermostat and thermistor, including perforated cover.
4. Clean lint and debris buildup from blower to maintain proper
airflow.

Quarterly

1. Use a vacuum to clean air vents on drive motors.
2. Check and clean steam coils, if applicable.
3. Check flow of combustion and ventilation air.
4. Check belt tension and condition. Replace worn or cracked
belts.
5. Clean the machine's top panel with mild detergent. Rinse with
clean water.
6. Models equipped with a fire suppression system: Perform
the fire suppression system maintenance test by pressing the
test button in the control box.
94
2
TMB2281N_SVG1
Figure 69
Part No. 70457901ENR12
Maintenance
3
4