Ce Orifices - ALLIANCE CA050L Installation Operation & Maintenance

Installation
the situations when the country of use or gas supply is different
than that on the serial plate. If applicable, peel off the appropriate
country sticker (included with machine) and apply it to the serial
plate over the existing country information.
These instructions are only valid if the following country code is
on the appliance: GB/IE/PT/ES/IT/GR/LU/CH/BE. If this code is
not present on the appliance, it is necessary to refer to the techni-
cal instructions which will provide the necessary information
concerning the modification of the appliance to the condition of
use for the country.
Before installation, check that the local distribution conditions,
nature of gas and pressure, and the adjustment of the appliance
are compatible.

CE Orifices

Gas Gas Gr
Typ Fa ou
e mily p
Natural Second I
2H(E)
Gas
I
2L
I
2E+
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Supply
Gas
Pressure
Des-
igna- in. wc
tion [mbar, kPa]
G20 8/10 [20/25,
2/2.5]
G25 10 [25, 2.5]
G20 8 [20, 2.0]
Table 1 continues...
Table 1 describes the different gases that are available in different
CE countries, and how the machines need to be configured to op-
erate with those gases. In the CE, there are Natural Gas configu-
rations that do not allow for machine regulation and L.P. Gas
configurations that must be regulated. For L.P. Gas, third family
B/P at 50 mbar [5 kPa], order Regulated Natural Gas machines
and convert according to Table 1 .
Manifold
Pressure
in. wc
[mbar, Capaci-
kPa] ty/Model
3.57 [8.9, 50
0.89]
75
5.06 [12.6, 50
1.26]
75
Unregulated 50
75
32
Ori-
fice Ori-
Diam- fice
eter Part
inch Num Qua
[mm ] ber ntity
0.1440 M40099 2
[3.7] 8
0.1405 M40101 3
[3.6] 4
0.1440 M40099 2
[3.7] 8
0.1405 M40101 3
[3.6] 4
0.1200 M40101 2
[3.0] 7
0.1160 M40102 3
[2.9] 2
Part No. 70457901ENR12