Dx4 Opl Control; Diagnostic Microprocessor Control - ALLIANCE CA050L Installation Operation & Maintenance

Operating Instructions
Temperature
Left But- 104°F [40°C]
ton
Middle 140°F [60°C ]
Button
Right 176°F [80°C]
Button
NOTE: Drying times will be dependent on the num-
ber of coins that are inserted in the coin slot.
IMPORTANT: To stop the tumble dryer at any time
during the cycle, OPEN DOOR. To restart the tumble
dryer, CLOSE door and press START button.
5. When the cycle is complete, open door and remove the laun-
dry.
To prevent the risk of fire, remove laundry imme-
diately in case of power failure.

DX4 OPL Control

3O and R3 Control Suffixes
1. Open door and fill drum with clothes.
2. Press and release one of the cycle buttons to select a cycle and
start the tumble dryer. Refer to Table 16 .
To use a custom cycle, refer to the Programming Manual.

Diagnostic Microprocessor Control

General Operation
The Diagnostic Microprocessor Control (DMP) is designed to
manage the drying and cooling cycles of the tumble dryer. The
controller is also programmed from the factory with five different
default programs as described below. The operator has the flexi-
bility to select the time for the drying and the cool down cycles
and the drying temperature. The operator may also select either
reversing or nonreversing basket action only if the tumble dryer
is equipped for reversing. The operator may also reprogram the
default programs. See Programming.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Dry-
ing
Tim
e
Varies
Varies
Varies
Table 15
WARNING
Co
ol
Do
wn
Tim
e
2 min.
2 min.
2 min.
Left But-
ton
Middle
Button
Right
Button
IMPORTANT: To stop the tumble dryer at any time
during the cycle, OPEN DOOR. To restart the tumble
dryer, CLOSE door and press START button.
3. When the cycle is complete, open door and remove the laun-
dry.
W779
To prevent the risk of fire, remove laundry imme-
diately in case of power failure.
Default
Pro-
grams
1 – Towels
80
Figure 58
Dry-
Tempera- ing
ture Time
104°F [40°C] 30 min.
140°F [60°C] 30 min.
176°F [80°C] 35 min.
Table 16
WARNING
Dry
Tim
e Cool Temp.
(Mi Time Set
n.) (Min.) Point
40 5 185º/195ºF
[85º/91ºC]
Part No. 70457901ENR12
TMB2266N_SVG
Cool
Down
Time
2 min.
2 min.
2 min.
W779
Re-
ver
s-
ing
No
Table continues...