Specifying The Size And Type Of The Paper In The Paper Drawer - Canon LBP352 User Manual

Specifying the Size and Type of the Paper in the Paper
Drawer
Specify the paper size and type as necessary depending on the paper you load in the paper drawer. When you use an
optional paper drawer, you need to specify the type of that paper drawer before specifying the paper size.
Specifying the Type of Drawer 1(P. 60)
Specifying Paper Size and Type(P. 60)
Specifying the Type of Drawer 1
When using the optional A5 cassette or custom media cassette, you need to specify <Select Drawer1 Model>. Also, you
need to change the setting back to <Standard Drawer> when replacing the optional paper drawer with the standard
paper drawer.
1
Press ( ).
2
Use / to select <Select Drawer1 Model>, and press
● When a message appears, press
3
Select the type of the paper drawer to install, and press
4
Perform a hard reset.
➠
The settings are enabled after the hard reset is performed.
Specifying Paper Size and Type
The factory default setting for paper size is <Auto>. With this setting, the machine automatically recognizes the size of
the loaded paper and therefore you need not change the paper size setting in most cases. You only need to set the
paper type. However, you need to set the paper size in the following cases.
● When using the A5 cassette or custom media cassette
● When using custom size paper
● When printing with paper size set to <Free Size>
Basic Operations
.
Performing a Hard Reset(P. 451)
60
0X7U-013
.
.