Table of Contents
Advertisement
Entering Numbers, Letters, and Symbols
Use the Numeric buttons to enter or edit such information as unit name, a recipient's name for the directory,
etc.
Switching the Input Mode
Each time the Tone button is pressed, the input mode is switched.
The current input mode appears at the upper right corner of the LCD.
Note
• Only numbers and symbols that are available for the type of information you are entering are
displayed, such as numbers for telephone or fax number input.
Entering Numbers, Letters, and Symbols
Press the Tone button to switch the input mode.
Use the Numeric buttons to enter the desired characters.
• To insert a space
Press the
button five times.
• To delete the last entered character
Press the Back button.
Editing Entered Numbers, Letters, and Symbols
Press the
or
button to move the cursor under the position you want to edit.
• To insert a space
Press the
button five times.
• To insert a character
Move the cursor under the character to the right of the insertion position, then enter the character. The
character on the cursor will move to the right and the new character will be inserted.
• To delete a character
Move the cursor under the character, then press the Back button.
111
Advertisement
Table of Contents
