Figure 5-22
Releasing the Lower End of the Vertical Encoder Strip
3. Unhook the encoder strip and hang it out of the way (see Figure 5-22).
WARNING
The edges of the vertical encoder are sharp. Be careful.
CAUTION
Handle the encoder strip with care and ONLY BY THE SOLID SIDE (see
Chapter 5
Removing/Replacing the Translate Frame (Including the Picker)
Pull down on the bottom of the encoder strip to release the strip from
its retaining peg. Once released, the strip will slide up and out of the
plastic guide.
Figure 5-22). The CLEAR side is made up of very fine slits and CAN
Removal and Replacement
5-35