Table 3-1 Configuration Choices - HP SureStore Optical Jukebox 160ex Service Manual

Configurations are described in the following table.
Table 3-1 Configuration Choices
Configuration
Name
RECOVERY
ON/OFF
RESTORE
DEFAULTS
CLEAR
ODOMETERS
DUAL PICKER
ON/OFF
STARWARS
ON/OFF
NEW PASSWORD
Chapter 3
Setting an Operating Configuration
Description
Toggles between ON and OFF. If set to ON, the
jukebox attempts to recover from errors. If set
to OFF, the jukebox immediately stops moving
if an error condition occurs. The default
configuration is RECOVERY ON, and recovery
should remain ON under normal conditions.
Sets all jukebox configurations to default
settings.
Sets all jukebox odometers to zero.
Toggles between ON and OFF. If set to ON, the
jukebox runs with dual picker addressing ON.
If set to OFF, the jukebox runs with dual picker
addressing OFF. The default setting is DUAL
PICKER ON and this mode should remain ON
under normal conditions. Single and
dual-picker addressing is described in Chapter
6 on page 6-18.
Toggles between ON and OFF. If set to ON, the
vertical sensors are enabled. If set to OFF, the
vertical sensors are disabled The default
configuration is ON and should remain ON
during normal operation.
Allows changing the numerical password
required to access the menu choices under the
ADMIN * menu on the jukebox control panel.
Menu choices include configurations, tests, and
information logs. To change the security code,
see "Changing the Administration Menu
Password" on page 13.
Operation and Configuration
3-21