HP SureStore Optical Jukebox 160ex Service Manual page 143

5. Remove all other drive cables to the failed drive :
6. Remove the T-20 screw holding the drive enclosure to the chassis for
CAUTION When removing the drive enclosure from the chassis in the next step, be
7. Carefully slide the drive enclosure back and out of the chassis. Avoid
WARNING The jukebox is active during an online replacement procedure —
the picker may move at any time. Do not extend your hand
through the chassis into the interior of the jukebox.
8. If there is a disk in the drive, use a disk eject tool to remove the disk
IMPORTANT Note whether the "A" or "B" side faces up when you remove the disk. The
Chapter 5
• #3 - SCSI
• #4 - drive interface cable
• #5 - drive fan power cable
the enclosure holding the failed drive.
careful not to damage the cables to the other drive in that stack.
catching the enclosure on cables connected to the other drive
enclosure in the stack.
from the drive.
a. Insert the eject tool (or paper clip) into the disk eject access hole
(see Figure 5-11).
b. When you feel firm pressure on the tip, push forward. The disk
mechanism will eject the disk.
disk must be inserted into the replacement drive with the same
orientation.
Removal and Replacement
Replacing an Optical Drive — Jukebox Online
5-21