Replacing The Control Panel Assembly; Reassembly Notes; Figure 5-5 Control Panel Assembly Mounting Screws - HP SureStore Optical Jukebox 160ex Service Manual

Replacing the Control Panel Assembly

1. Remove the right front panel (see "Removing the Right, Left, and
Rear Access Panels" on page 5 and "Removing the Left and Right
Front Panels" on page 6).
2. Turn the panel upside down.
3. Remove the four T-10 sheet metal screws from the control PCA
retaining ring to detach the control panel PCA from the mounting
assembly (see the arrows on Figure 5-5).
4. Remove the control panel.
Figure 5-5 Control Panel Assembly Mounting Screws

Reassembly Notes

When replacing the right front panel back onto the chassis, ensure that
the control panel is turned to face the same way as when the panel was
removed (see Figure 1). The control panel PCA can be damaged if
Chapter 5
Removal and Replacement
Replacing the Control Panel Assembly
5-13