Page of 230
Download Table of ContentsContents Print This PagePrint Bookmark

HP SureStore Optical Jukebox 160ex Service Manual: Setting An Operating Configuration

Hide thumbs

Advertisement

Operation and Configuration

Setting an Operating Configuration

Setting an Operating Configuration
READY > ADMIN * > CONFIG *
Configurations customize the way the jukebox operates.
Start with READY in the display.
1. Press
2. Enter the administration password.
3. TEST * displays. Press
4. Press
5. If the current configuration setting is flashing, press
6. Press
CAUTION
Turning off the jukebox in the next step could cause data loss if not done
7. Turn the jukebox OFF, then ON to save the configuration to the
3-20
until ADMIN * displays.
NEXT
You may have to coordinate with the system administrator to enter
the password.I
.
ENTER
or
NEXT
PREV
set displays and then press
the following pages.)
If the configuration has multiple settings, the current setting flashes.
Otherwise, the configuration is set and a confirmation message
displays.
until the desired setting displays, and then press
SAVED displays and then the configuration's name and setting
displays.
to return to READY.
CANCEL
correctly.
Do not turn off power to the jukebox until you are sure the SCSI bus
is inactive. Removing power from a SCSI device when the bus is
active can result in data loss and/or indeterminate bus states. Check
the host system manuals for information about checking the SCSI bus
status.
jukebox flash ROM.
until CONFIG * displays, and then press
NEXT
until the name of the configuration you want to
. (Configurations are described on
ENTER
or
NEXT
PREV
. OPTION
ENTER
Chapter 3

Advertisement

   Related Manuals for HP SureStore Optical Jukebox 160ex

Comments to this Manuals

Symbols: 0
Latest comments: