Upgrading Firmware To The Current Revision Level; What Is Needed - HP SureStore Optical Jukebox 160ex Service Manual

Removal and Replacement

Upgrading Firmware to the Current Revision Level

Upgrading Firmware to the Current Revision
Level

What is Needed

PC Tool hardware
The following hardware and software is required:
• IBM AT-compatible computer
• Adaptec interface board
• Cables and adapters that will enable you to connect the SCSI port of
your PC tool to a high-density SCSI port on the jukebox.
In addition to a service SCSI cable stored inside the jukebox you may
need an adapter from the list below:
PTI cable:
Adaptec products
• A firmware download utility such as SCSI Toolbox® by Peripheral
Test Instruments (PTI)
• An MO scratch disk for testing the drives.
Current Jukebox and Drive Firmware
Obtain the most current version of the jukebox controller and drive
firmware for the model and option of the jukebox you are
upgrading/converting.
Firmware for all models and options of this jukebox is available for
5-58
50-pin to 68-pin cable (PTI part
number HP01)
Adaptec APA 1460 connector
(Adaptec part no. ACK-1460-50HD)
Internal converter
(Adaptec part no. ACK-68P-50P-IU)
Standard 68-pin male to 68-pin male
SCSI cable
Chapter 5