Protecting Yourself and the Product
Do not disassemble the optical drive mechanism. The optical
WARNING
drive mechanism becomes a Class 3B laser device when
disassembled. If the drive is disassembled, exposure to the
invisible laser beam and hazardous invisible laser radiation
could result in blindness.
NOTE
An optical drive that has been disassembled will not be accepted as an
exchange assembly.
Electrostatic Discharge (ESD) Precautions
The optical disk jukebox contains very sensitive electrical components.
It is extremely important that you follow the proper procedures for
preventing ESD (Electrostatic Discharge). Use wrist-grounding straps,
anti-static mats, and anti-static work stations when removing and
replacing the major assemblies.
NOTE
Failure to follow proper procedures could lead to intermittent failures
and/or premature hard failures in the disk controller and mechanism.
Required Tools
The following tools are needed for assembly/disassembly of the jukebox:
• Pozidriv® magnetized screwdriver
• flatblade screwdriver
• Needle-nose pliers
• Flatblade screwdriver
Chapter 5
Removal and Replacement
Protecting Yourself and the Product
5-3