Site Selection - QUANTA W Mainboard Series S210-MBT2W Technical Manual

S I
AFETY NFORMATION

[7.1.32] Site Selection

[7.1.33] The system is designed to operate in a typical office
environment. Choose a site that is:
Clean, dry, and free of airborne particles (other than nor-

mal room dust).
Well-ventilated and away from sources of heat including

direct sunlight and radiators.
Away from sources of vibration or physical shock.

Isolated from strong electromagnetic fields produced by

electrical devices.
In regions that are susceptible to electrical storms, we rec-

ommend you plug your system into a surge suppressor
and disconnect telecommunication lines to your modem
during an electrical storm.
Provided with a properly grounded wall outlet.

Provided with sufficient space to access the power supply

cord(s), because they serve as the product's main power
disconnect.
Provided with either two independent AC power sources

or two independent phases from a s single source.
[7.1.34] Equipment Handling
Practices
[7.1.35] Reduce the risk of personal injury or equipment dam-
age:
Conform to local occupational health and safety require-

ments when moving and lifting equipment.
Use mechanical assistance or other suitable assistance

when moving and lifting equipment.
To reduce the weight for easier handling, remove any eas-

ily detachable components.
[7.1.36] Power and Electrical Warn-
ings
CAUTION!
!
[7.1.37] T
HE POWER BUTTON
, DOES NOT
MARKING
, 5V
POWER STANDBY POWER IS ACTIVE WHENEVER THE SYSTEM IS
. T
PLUGGED IN O REMOVE POWER FROM SYSTEM
AC
UNPLUG THE POWER CORD FROM THE WALL OUTLET
SYSTEM MAY USE MORE THAN ONE
AC
ALL POWER CORDS ARE UNPLUGGED
( )
POWER CORD S IS
,
CHASSIS OR ADD OR REMOVE ANY NON HOT
7-3
E H
QUIPMENT ANDLING
, -
INDICATED BY THE STAND
COMPLETELY TURN OFF THE SYSTEM
,
YOU MUST
AC . M
POWER CORD
. M
AKE SURE THE
/
ARE UNPLUGGED BEFORE YOU OPEN THE
-
PLUG COMPONENTS
P
RACTICES
BY POWER
AC
. Y
OUR
AKE SURE
AC
.