Intended Application Uses; Site Selection - QUANTA Rackgo X Series F03A Technical Manual

P M
RECAUTIONARY EASURES
Table 1: Warning and Cautions (Continued)

Intended Application Uses

This product was evaluated as Information Technology Equipment (ITE), which may be
installed in offices, schools, computer rooms, and similar commercial type locations. The
suitability of this product for other product categories and environments (such as medical,
industrial, residential, alarm systems, and test equipment), other than an ITE application,
may require further evaluation.

Site Selection

The system is designed to operate in a typical office environment. Choose a site that is:
Clean, dry, and free of airborne particles (other than normal room dust).

Well-ventilated and away from sources of heat including direct sunlight and radia-

tors.
Away from sources of vibration or physical shock.

Isolated from strong electromagnetic fields produced by electrical devices.

Provided with a properly grounded wall outlet.

Provided with sufficient space to access the power system, because they serve as the

product's main power disconnect.
XI
The enclosure is designed to carry only the weight of the system sled. Do not
use this equipment as a workspace. Do not place additional load onto any
equipment in this system.
Do not move racks by yourself. Due to the height and weight of the rack, a min-
imum of two people should accomplish this task.
Indicates two people are required to safely handle the system.
Restricted Access Location: The system is intended for installation only in a
Server Room or Computer Room where both these conditions apply:
 access can only be gained by SERVICE PERSONS or by USERS who have
been instructed about the reasons for the restrictions applied to the loca-
tion and about any precautions that shall be taken; and
 access is through the use of a TOOL or lock and key, or other means of secu-
rity, and is controlled by the authority responsible for the location.