System Access Warnings - QUANTA W Mainboard Series S210-MBT2W Technical Manual

S I
AFETY NFORMATION
[7.1.49] System Access Warn-
ings
CAUTION!
!
[7.1.50] T
O AVOID PERSONAL INJURY OR PROPERTY DAMAGE
FOLLOWING SAFETY INSTRUCTIONS APPLY WHENEVER ACCESSING
THE INSIDE OF THE PRODUCT
Turn off all peripheral devices connected to this product.

Turn off the system by pressing the power button to off.

Disconnect the AC power by unplugging all AC power cords

from the system or wall outlet.
Disconnect all cables and telecommunication lines that are

connected to the system.
Retain all screws or other fasteners when removing access

cover(s). Upon completion of accessing inside the product,
refasten access cover with original screws or fasteners.
Do not access the inside of the power supply. There are no

serviceable parts in the power supply. Return to manufac-
turer for servicing.
Power down the server and disconnect all power cords

before adding or replacing any non hot-plug component.
When replacing a hot-plug power supply, unplug the power

cord to the power supply being replaced before removing
the power supply from the server.
,
THE
:
CAUTION!
!
[7.1.51] I
F THE SERVER HAS BEEN RUNNING
( )
CESSOR S AND HEAT SINK
CAUTION!
!
[7.1.52] U
NLESS YOU ARE ADDING OR REMOVING A HOT
,
COMPONENT ALLOW THE SYSTEM TO COOL BEFORE OPENING THE
. T
COVERS O AVOID THE POSSIBILITY OF COMING INTO CONTACT
WITH HOT COMPONENT
CAREFUL WHEN REMOVING OR INSTALLING THE HOT
( ).
NENT S
CAUTION!
!
[7.1.53] T
O AVOID INJURY DO NOT CONTACT MOVING FAN BLADES
I
F YOUR SYSTEM IS SUPPLIED WITH A GUARD OVER THE FAN
NOT OPERATE THE SYSTEM WITHOUT THE FAN GUARD IN PLACE
7-5
S A W
YSTEM CCESS
,
ANY INSTALLED PRO
( ) .
S MAY BE HOT
-
PLUG
( ) -
S DURING A HOT PLUG INSTALLATION
-
PLUG COMPO
ARNINGS
-
,
BE
-
.
,
DO
.