Preserve Configuration - QUANTA W Mainboard Series S210-MBT2W Technical Manual

BMC
[3.1.490] To open Firmware Update page, click Maintenance >
Firmware Update from the main menu. A sample screenshot
of Firmware Update Page is shown in the screenshot below.
[3.1.491] Firmware Update Page
[3.1.492] Procedure:
[3.1.493] Click Enter Update Mode to upgrade the current
device firmware. As below step by step:
3.1.494.1.Closing all active client requests.
3.1.495.2.Preparing device for firmware upgrade.
3.1.496.3.Uploading firmware image.
3.1.497.4.Verifying firmware image.
3.1.498.5.Flashing firmware image.
3.1.499.6.Resetting Device.
Note:
[3.1.500] You can now follow the instructions presented in the
subsequent pages to successfully update the card's firmware.
The device will reset if update is canceled. The device will also
reset upon successful completion of firmware update.

[3.1.501] Preserve Configuration

[3.1.502] This page allows the user to configure the preserve
configuration items, which will be used by the Restore factory
defaults to preserve the existing configuration without overwrit-
ing with default configuration.
[3.1.503] Restore Factory Defaults
[3.1.504] In MegaRAC GUI, this option is used to restore the
factory defaults of the device firmware.
WARNING!
!
[3.1.505] Please note that after entering restore factory wid-
gets, other web pages and services will not work. All open wid-
gets will be closed automatically. The device will reset and
reboot within a few minutes.
[3.1.506] To open Restore Factory Defaults page, click Mainte-
nance > Restore Factory Defaults from the main menu. A
3-55
M G
AINTENANCE ROUP