Romley Keys - QUANTA W Mainboard Series S210-MBT2W Technical Manual

A S
BOUT THE ERVER
[1.3.102] The SATA active LED output of the Patsburg PCH
should be WIRE-OR'd via zero ohm resistors with the add-in
card LED DRIVE ACTIVE_N signal that is connected to the
baseboard via 2-pin header.
[1.3.103] SATA/SAS LED
P
IN
1
2
[1.3.104] It is important to note that the AHCI SATA3 ports do
not communicate with the AHCI SATA3 ports from a RAID stack
perspective.

[1.3.105] Romley Keys

[1.3.106] Single 3pin header on baseboard that covers S210-
MBT2W key combinations.
[1.3.107] Romley Baseboard Activation Key Connector: Molex
p/n 53290-0380
[1.3.108] Baseboard SAK/SRAK/RAK Connector Pinout
P
IN
1
2
5
S N
IGNAL AME
LED_HD_ACTIVE_L
NC
S N
IGNAL AME
GND
FM_PBG_DYN_SKU_KEY
FM_SSB_SAS_SATA_RAID_KEY
1-42
S A SCSI / S ATA
ERIAL TTACHED ERIAL