Europe (Ce Declaration Of Conformity) - QUANTA W Mainboard Series S210-MBT2W Technical Manual

R C I
EGULATORY AND OMPLIANCE NFORMATION
[8.2.34] Europe (CE Declaration
of Conformity)
[8.2.35] This product has been tested in accordance too, and
complies with the Low Voltage Directive (73/23/EEC) and EMC
Directive (89/336/EEC). The product has been marked with the
CE Mark to illustrate its compliance.
[8.2.36] VCCI (Japan)
[8.2.37] English translation of the notice above:
[8.2.38] This is a Class A product based on the standard of the
Voluntary Control Council for Interference (VCCI) from Informa-
tion Technology Equipment. If this is used near a radio or televi-
sion receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the
instruction manual.
[8.2.39] BSMI (Taiwan)
[8.2.40] The BSMI Certification Marking and EMC warning is
located on the outside rear area of the product
[8.2.41] Regulated Specified
Components
[8.2.42] To maintain the UL listing and compliance to other reg-
ulatory certifications and/or declarations, the following regu-
lated components must be used and conditions adhered to.
Interchanging or use of other component will void the UL listing
and other product certifications and approvals.
[8.2.43] Updated product information for configurations can be
found on the site at the following URL:
taQCT.com
[8.2.44] If you do not have access to the Web address, please
contact your local representative.
Add-in cards: must have a printed wiring board flammabil-

ity rating of minimum UL94V-1. Add-in cards containing
8-3
E (CE D C
UROPE ECLARATION OF ONFORMITY
http://www.Quan-
)