Loading Bios Defaults - QUANTA W Mainboard Series S210-MBT2W Technical Manual

BIOS

[2.1.148] Loading BIOS Defaults

[2.1.149] Different mechanisms exist for resetting the system
configuration to the default values. When a request to reset the
system configuration is detected, the BIOS loads the default
system configuration values during the next POST. The request
to reset the system to the defaults can be sent in the following
ways:
A request to reset the system configuration can be gener-

ated by pressing <F9> from within the BIOS Setup utility.
A reset system configuration request can be generated by

moving the clear system configuration jumper.
[2.1.150] BIOS settings are stored on NVRAM. Only the D4 set-
ting uses the CMOS. BIOS implements a mechanism to clear
NVRAM and CMOS.
[2.1.151] After clearing CMOS by battery or jumper, all vari-
ables in the BIOS setup Menu load with the default values.
BMC related variables, like Set BMC LAN Configuration in
BIOS setup menu, are able to synchronize from BMC.
2-51
L BIOS D
OADING EFAULTS