Maintenance Group - QUANTA W Mainboard Series S210-MBT2W Technical Manual

BMC
menu. A sample screenshot of Power Control and Status page
is shown in the screenshot below.
[3.1.477] Power Control and Status Page
[3.1.478] The various options of Power Control are given
below.
[3.1.479] Server Power Control
I
TEM
This option will reboot the system without power-
Reset Server
ing off (warm boot).
Power Off Server –
This option will immediately power off the server.
Immediate
Power Off Server – This option will initiate operating system shut-
Orderly Shutdown down prior to the shutdown.
Power On Server This option will power on the server.
This option will first power off, and then reboot
Power Cycle Server
the system (cold boot).
D
ESCRIPTION
3-53
[3.1.479] Server Power Control (Continued)
I
TEM
Click this option to perform the selected opera-
Perform Action
tion.
[3.1.480] Procedure:
[3.1.481] Select an action and click Perform Action to proceed
with the selected action.
Note:
[3.1.482] You will be asked to confirm your choice. Upon con-
firmation, the command will be executed and you will be
informed of the status.

[3.1.483] Maintenance Group

[3.1.484] This group of pages allows you to do maintenance
tasks on the device. The menu contains the following items:
Firmware Update

Preserve Configuration

Restore Factory Defaults

M G
AINTENANCE ROUP
D
ESCRIPTION