QUANTA W Mainboard Series S210-MBT2W Technical Manual page 203

BMC
[3.1.134] To open DNS Server Settings page, click Configura-
tion > DNS from the main menu. A sample screenshot of DNS
Server Settings Page is shown in the screenshot below.
[3.1.135] DNS Server Settings Page
[3.1.136] The fields of DNS Server Settings page are explained
below.
[3.1.137] DNS Server Settings Page
I
TEM
Host configuration
Host Settings Choose either Automatic or Manual settings.
D
ESCRIPTION
3-16
[3.1.137] DNS Server Settings Page (Continued)
I
TEM
It displays hostname of the device. If the Host
Host Name setting is chosen as Manual, then specify the
hostname of the device.
Domain Name Configuration
It lists the option for domain interface as Manual,
v4 or v6 for multiLAN channels.
Domain Settings Note:
[3.1.138] If you choose DHCP, then select v4 or
v6 for DHCP servers.
It displays the domain name of the device. If the
Domain setting is chosen as Manual, then spec-
ify the domain name of the device. If you chose
Domain Name
Automatic, the Domain Name cannot be config-
ured as it will be done automatically. The field
will be disabled.
IPv4 Domain Name Server Configuration
It lists the option for v4 DNS settings for the
DNS Server Settings:
device, Manual and available LAN interfaces.
The DNS (Domain Name System) server v4
address to be configured to the device.
IP Address made of 4 numbers separated by

Preferred DNS Server
dots as in "xxx.xxx.xxx.xxx".
Each number ranges from 0 to 255.

First number must not be 0.

Alternate DNS Server
IPv6 Domain Name Server Configuration
C G
ONFIGURATION ROUP
D
ESCRIPTION