Intended Application Uses - QUANTA W Mainboard Series S210-MBT2W Technical Manual

S I
AFETY NFORMATION
[7.1.17] Indicates hot components or surfaces.
[7.1.16]
[7.1.18]
[7.1.19] Indicates do not touch fan blades, may
result in injury.
[7.1.20]
[7.1.21] Indicates to unplug all AC power cord(s) to
disconnect AC power.
[7.1.23] Please recycle battery.
[7.1.22]
[7.1.25] The rail racks are designed to carry only
the weight of the server system. Do not use rail-
mounted equipment as a workspace. Do not place
additional load onto any rail-mounted equipment.
[7.1.24]
[7.1.26]
[7.1.27] Indicates two people are required to safely
handle the system.
[7.1.29] Restricted Access Location: The server
is intended for installation only in a Server Room or
Computer Room where both these conditions
apply:
access can only be gained by SERVICE PER-

SONS or by USERS who have been instructed
about the reasons for the restrictions applied to
[7.1.28]
the location and about any precautions that shall
be taken; and
access is through the use of a TOOL or lock and

key, or other means of security, and is controlled
by the authority responsible for the location.
[7.1.30] Intended Application
Uses
[7.1.31] This product was evaluated as Information Technology
Equipment (ITE), which may be installed in offices, schools,
computer rooms, and similar commercial type locations. The
suitability of this product for other product categories and envi-
ronments (such as medical, industrial, residential, alarm sys-
tems, and test equipment), other than an ITE application, may
require further evaluation.
7-2
I A U
NTENDED PPLICATION SES