QUANTA W Mainboard Series S210-MBT2W Technical Manual page 207

BMC
[3.1.168] To add a new Role Group
3.1.169.8.In the LDAP Settings Page, select a blank row and
click Add Role Group to open the Add Role group Page
as shown in the screenshot below.
[3.1.170] Add Role group Page
3.1.171.9.In the Role Group Name field, enter the name that
identifies the role group.
Note:
Role Group Name is a string of 255 alpha-numeric charac-

ters.
Special symbols hyphen and underscore are allowed.

3.1.172.10.In the Role Group Search Base field, enter the
path from where the role group is located to Base DN.
Note:
Search Base is a string of 255 alpha-numeric characters.

Special symbols hyphen, underscore and dot are allowed.

3.1.173.11.In the Role Group Privilege field, enter the level
of privilege to assign to this role group.
3.1.174.12.Click Add to save the new role group and return
to the Role Group List.
3.1.175.13.Click Cancel to cancel the settings and return to
the Role Group List.
[3.1.176] To Modify Role Group
3.1.177.14.In the LDAP Settings Page, select the row that
you wish to modify and click Modify Role Group.
3.1.178.15.Make the necessary changes and click Save.
[3.1.179] To Delete a Role Group
3.1.180.16.In the LDAP Settings Page, select the row that
you wish to delete and click Delete Role Group.
3-20
C G
ONFIGURATION ROUP