QUANTA W Mainboard Series S210-MBT2W Technical Manual page 215

BMC
[3.1.247] PEF Management - Alert Policy
I
TEM
Displays Policy entry number for the newly con-
Policy Entry #
figured entry (read-only).
Policy Number Displays the Policy number of the configuration.
Policy Configuration To enable or disable the policy settings.
To choose any one of the Policy set values from
the list.
0: Always send alert to this destination.

1: If alert to previous destination was suc-

cessful, do not send alert to this destination.
Proceed to ESMS Functional Specification
For SI v0.11 next entry in this policy set.
2: If alert to previous destination was suc-

cessful, do not send alert to this destination.
Policy Set
Do not process any more entries in this policy
set.
3: If alert to previous destination was suc-

cessful, do not send alert to this destination.
Proceed to next entry in this policy set that is
to a different channel.
4: If alert to previous destination was suc-

cessful, do not send alert to this destination.
Proceed to next entry in this policy set that is
to a different destination type.
To choose a particular channel from the avail-
Channel Number
able channel list.
D
ESCRIPTION
3-28
[3.1.247] PEF Management - Alert Policy (Continued)
I
TEM
To choose a particular destination from the con-
figured destination list.
Note:
Destination Selector
[3.1.248] LAN Destination has to be configured -
Configuration > PEF > LAN Des-
under
tination
To save the new alert policy and return to Alert
Add
Policy list.
Modify To modify the existing entries.
To cancel the modification and return to Alert
Cancel
Policy list.
[3.1.249] Procedure:
3.1.250.1.In the Alert Policy Tab, select the slot for which you
have to configure the Alert policy. That is, In the Event
Filter Entry Page, if you have chosen Alert Policy num-
ber as 4, you have to configure the 4th slot (the slot with
Policy Number 4) in the Alert Policy Tab.
C G
ONFIGURATION
D
ESCRIPTION
.
ROUP