QUANTA W Mainboard Series S210-MBT2W Technical Manual page 212

BMC
[3.1.219] The fields of PEF Management – Event Filter Tab are
explained below.
[3.1.220] This page contains the list of configured PEF's.
[3.1.221] PET Management - Event Filter
I
TEM
This field displays the ID for the newly config-
PEF ID
ured PEF entry (read-only).
Filter configuration Check box to enable the PEF settings.
Check box to enable PEF Alert action. This is a
Event Filter Action
mandatory field.
To choose any one of the Event severity from the
Event Severity
list.
To choose the particular sensor from the sensor
Sensor Name
list.
To add the new event filter entry and return to
Add
Event filter list.
Modify To modify the existing entries.
To cancel the modification and return to Event fil-
Cancel
ter list.
[3.1.222] Procedure:
3.1.223.1.Click the Event Filter Tab to configure the event
filters in the available slots
D
ESCRIPTION
3-25
3.1.224.2.To Add an Event Filter entry, select a free slot and
click Add to open the Add event Filter entry Page. A sam-
ple screenshot of Add Event Filter Page is in seen the
screenshot below.
[3.1.225] Add Event Filter Entry Page
3.1.226.3.In the Event Filter Configuration section,
PEF ID displays the ID for configured PEF entry (read-

only).
In filter configuration, check the box to enable the PEF

settings.
In Event Severity, select any one of the Event severity

from the list.
C G
ONFIGURATION ROUP