Clear Cmos - QUANTA W Mainboard Series S210-MBT2W Technical Manual

BIOS
2.2.173.6.Set the BIOS recovery jumper back to default posi-
tion and wait until the recovery process is completed. See
Mainboard Jumpersand Figure 2.2.174.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset Server Mgmt Boot Security
WARNING! System firmware is being updated.
Keyboard is locked.
DO NOT TURN THE POWER OFF !!!
Once firmware update is completed
press any key to reboot the system
Flash update progress completed.
Version 2.10.1208 - Copyright (C) 2010 American Megatrends, Inc.
[2.2.174] BIOS Recovery Completed
[2.2.175] Reboot the system with the new BIOS.
Save & Exit Recovery
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: Genenal Help
F8: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
2-54

[2.2.176] Clear CMOS

[2.2.177] The following steps will load the BIOS defaults by
jumber:
2.2.178.1.Power down the system.
2.2.179.2.Move CMOS clear jumper from pins 1-2 to pins 2-3
for a few seconds. See Mainboard Jumpers.
2.2.180.3.Move CMOS clear jumper back to pins 1-2. See
Mainboard Jumpers.
2.2.181.4.System automatically powers on.
2.2.182.5.Check BIOS defaults are loaded.
[2.2.183] Clear Password
2.2.184.1.Power down the system.
2.2.185.2.Move password clear jumper from pins 1-2 to pins
2-3. See Mainboard Jumpers.
2.2.186.3.Power on the system.
2.2.187.4.Make sure password is cleared.
2.2.188.5.Power down the system.
C CMOS
LEAR