Front Panel User Interface - QUANTA W Mainboard Series S210-MBT2W Technical Manual

BMC
[3.2.536] Front Panel User Inter-
face
[3.2.537] The BMC provides control panel interface functional-
ity including indicators (Fault/status and Identify LEDs) and but-
tons (Power/ID).
[3.2.538] Power Button
[3.2.539] As previous described, the Power buttons provide
one of the sources for system status control.
[3.2.540] ID Button
[3.2.541] The control panel Chassis Identify button toggles the
state of the Chassis ID LED. If the ID LED is off, then a button
press will turn the LED on (blinking). If the LED is on, a button
press or IPMI Chassis Identify command will turn the LED off.
[3.2.542] LEDs
[3.2.543] The following table contains information on Status, ID
and Heartbeat LED's
[3.2.544] Status LED, ID LED, and Heartbeat LED
LED C
S OLOR
Amber (Status
LED)
Power / Sta-
tus LED
Green
ID LED Blue
Heartbeat
Green
LED
3-60
F P U I
RONT ANEL SER NTERFACE
S D
TATUS ESCRIPTION
System Event
Blinking
(See following Status LED
table.)
Off Normal status
Power On without System
On
Event
Power On with System
Blinking
Event
Off Power off
Off Normal status
Identify the system with
Blinking
interval
Solid On Identify the system
Solid On/
BMC is not Ready
Off
Blinking BMC is Ready