Server Power Control; Maintenance Group - QUANTA QuantaGrid Series User Manual

BMC

Server Power Control

This page allows you to view and control the power of your server.
To open Power Control and Status page, click Remote Control > Server Power Control
from the main menu. A sample screenshot of Power Control and Status page is shown in
the screenshot below.
The various options of Power Control are given below.
Table 37: Server Power Control
I
TEM
Reset Server
Power off Server – Immediate
Power off Server – Orderly Shut-
down
Power On Server
Power Cycle Server
Perform Action
Procedure:
Select an action and click Perform Action to proceed with the selected action.
Note:
You will be asked to confirm your choice. Upon confirmation, the command will be executed
and you will be informed of the status.

Maintenance Group

This group of pages allows you to do maintenance tasks on the device. The menu contains
the following items:
BMC Firmware Update

BIOS Update

Figure 3-49. Power Control and Status Page
This option will reboot the system without powering off (warm boot).
This option will immediately power off the server.
This option will initiate operating system shutdown prior to the shut-
down.
This option will power on the server.
This option will first power off, and then reboot the system (cold boot).
Click this option to perform the selected operation.
M
D
ESCRIPTION
G
AINTENANCE ROUP
3-70