Loading Bios Defaults - QUANTA QuantaGrid S31A-1U User Manual

BIOS
Table 9: Exit Screen Description (Continued)
S I
ETUP TEM
[<Device String
6>]

Loading BIOS Defaults

Different mechanisms exist for resetting the system configuration to the default values.
When a request to reset the system configuration is detected, the BIOS loads the default
system configuration values during the next POST. The request to reset the system to the
defaults can be sent in the following ways:
Pressing <F9> from within the BIOS Setup utility

Load BIOS defaults by jumper as follows:

1. Power down the system.
2. Move CMOS clear jumper from pins 2-3 to pins 1-2 for a few seconds.
3. Move CMOS clear jumper back to pins 2-3.
4. System automatically powers on.
5. Check BIOS defaults are loaded.
O
PTIONS
H T
ELP EXT
Boot with Device <Device String
6>
L BIOS D
OADING EFAULTS
C
OMMENTS
2-14